High-Speed Rail Brake Disc Fasteners

12-Point Flange Bolt.

Non-standard · 10.9 · M16 × 85; M16 × 105

12-Point Flange Bolt for high-speed rail. Review the product reference, recorded specifications and drawing requirements to identify the configuration needed for your assembly.

Catalogue reference: CF-RT-021

Grade / hardness10.9
Size / designationM16 × 85; M16 × 105
Surface treatmentSee parameters
Standard / drawingNon-standard
Request a quote

Parameters

Technical parameters.

Product technical parameters
Product12-Point Flange Bolt
Standard / drawingNon-standard
Grade / hardness10.9
Size / designationM16 × 85; M16 × 105
Surface treatmentSelf-lubricating, moisture-resistant and UV-resistant treatment
Friction coefficient (µ total)0.05–0.1
ApplicationHigh-speed rail
Application recordRecorded since 2015

Confirm the final specification against the order drawing. A recorded application year is not a service-life or warranty statement.

  • The white-background cover shows the visually matched product type. Exact dimensions, grade and finish are defined by the parameters and confirmed drawing, not by the photograph.

Product details

Product description.

High-speed rail brake disc fastening.

This entry belongs to the high-speed rail brake disc fastening group. The product record is the starting point for identifying the required bolt, pin or nut; the approved assembly drawing determines the exact version. Vehicle speed, operating duty and installation approval need project-specific confirmation.

Brake disc assembliesHigh-speed rail

Design basis

This is a drawing-defined or non-standard configuration. Start with the product name and catalogue reference, then provide the current drawing revision and the exact version required. The parameter table records the supplied specification; dimensions, material designation and acceptance requirements that are not stated there should be confirmed before quotation.

Drawing and part reference

Head, shank & thread

Identify the head form, thread designation, overall or under-head length and any fitted-shank or shoulder details from the drawing. Where the product name specifies a flange, drilled hole, special drive or cone neck, include that feature in the part reference. A similar photograph is not enough to establish the same specification.

Configuration to confirm

Finish & assembly conditions

The listed treatment is Self-lubricating, moisture-resistant and UV-resistant treatment. Specify which listed option is required, together with any drawing-defined preparation or inspection requirements. The recorded friction requirement should remain linked to that specification; it is not an installation-torque value. Tightening instructions and acceptance conditions need confirmation for the actual assembly.

Project-specific requirements

Selection guide.

A clear drawing and complete inquiry help distinguish the exact part from another fastener in the same application group.

  • Part reference

    Send the drawing number and revision, or identify the existing component.

  • Dimensions

    Thread, pitch, length and mating dimensions. Mark any special geometry on the drawing.

  • Grade / hardness

    Identify the required listed option and retain its original grade or hardness notation.

  • Surface requirements

    State the required finish and any project-specific friction or inspection requirements.

  • Order scope

    Specify quantity, additional components and your requested delivery date.

Quote catalogue reference CF-RT-021 when contacting us. Related products below are separate catalogue entries, not a pre-approved assembly kit. Please confirm mating parts and final requirements against the assembly drawing.

Discuss your drawing

Start a Project

Bring us the drawing, specification or operating problem.

Share the application, quantity, material, grade, finish, drawing and delivery target. We will use those details to frame the next technical conversation.

RFQ